OT8 Biologically Removes Oil Stains From Hard Surfaces

OT8

Biological Oil Stain Remover: Hard Surfaces

A new approach to the removal of oil stains on hard surfaces and porous block work.

A biological oil stain remover that rapidly removes and digests oil stains from surfaces such as block work, paving stones, concrete, forecourts, garage floors, driveways and equipment.

KEY PROPERTIES

Penetrates and lifts oil stains from most porous surfaces.

Contains a blend of biological enzymes and bacteria to digest oil stains to completion.

Biological

Biodegradable

APPROVALS

German UBA (3406-0001)
Separator Friendly
UK Environmental Agency report on the bacteria used in this product

− Environmentally acceptable chemical.
− Meets pr EN 858
− Full report.
− Summary report.

APPLICATION

With an application rate of approximately 1 litre per square metre, OT8 is simple to use and lifts oil stains from most porous surfaces.

Shake container before use (to put bacteria into suspension).
Water wet the oil stain before applying OT8.
Brush into the stain until OT8 changes colour from white to brown.
Leave for 20 minutes and water rinse.
Then apply the absorbent powder, contained in each kit, to absorb free oil and prevent spills to surface drains.
Sweep up and dispose of according to local regulations. Rinse clean.

A second application may be required on porous surfaces as the biological activity in OT8 brings ingrained oil to the surface.

IMPORTANT

OT8 is a biological solution that uses harmless bacteria to remove oil stains from porous surfaces.

On old, weathered and ingrained oil stains, the oil stain may “re-appear”. This is because the bacteria in OT8 keep working after application to bring the ingrained oil stain to the surface. Some types of concrete are more easily treated than others and for optimum stain removal it may be necessary for OT8 to be applied more than once, over an extended period of time.

OT8 is not suitable for oil stains on Tarmac − please use Bio TA.

ALTERNATIVE FORMATS

OT4 − A 50% dilution for use by cleaning contractors.

TECHNICAL DATA

Appearance	Opaque white liquid	Bacteria Count	2.0 × 10⁷ cfu/ml
SG	0.96

AVAILABLE PACK SIZES

20Ltr, 4×5Ltr, 1Ltr, 1 metre² kit, 5 metre² kit.

SAFE HANDLING AND STORAGE

Store in original containers and avoid extremes of temperature.
For guidance on handling and disposal see Material Safety Data Sheet.


Manufactured & supplied by
Bio Technics Ltd. Linton Business Park, Gourdon, Aberdeenshire, Scotland UK DD10 0NH	Tel: +44(0) 1561 361515 Fax: +44(0) 1561 361001	Home page Contact us