S-Oil Treat

A biological treatment system to remove oil from oil contaminated soils without the need for offsite excavation.

Degrades and digests oil pollution in-situ.

KEY PROPERTIES

A unique blend of aerobic oil digesting bacteria proven to efficiently digest oil and produce no harmful by-products without risk to the environment.

APPROVALS

  • UK Environmental Agency report on the bacteria used in this product
− 
− 
Full report.
Summary report.
  • Middle East Application
− 
Report by:
Industrial Systems Corp. LLC
Muscat, Oman
.
  • Remedios −
    a report on the bio-remediation in Kuwait of oil contaminated sand, see page 27 for effectiveness of S−Oil Treat. (8MB)
− 
Report by:
Remedios,
Aberdeen, Scotland
.

APPLICATION

  • Isolate surrounding ground water from increasing contamination. For small areas the contaminated soil can be lifted onto a polythene sheet. For larger areas, trenches may have to be dug to collect run-off.
  • Till the polluted area to break up the soil and aerate it and introduce S-Oil Treat at a level of 0.5 kg cubic metre of polluted soil.
  • Spray the area with water to maintain damp conditions. Recycle run-off water to the soil to limit dispersal of oil and active bacteria.
  • Once wet, the remediation process is supported by spraying dilute nutrient solution, typically 1% of Bio Technics Nutrient 8 solution in water, onto the soil using one of the packs supplied with the culture each week.
  • If the soil is liable to compaction, it must be re-tilled to maintain aeration and may require additional culture and nutrient.
  • If the soil is liable to compaction, it must be re-tilled to maintain aeration and may require additional culture and nutrient.
  • Keep the soil damp, aerated and fed with S-Oil Treat and Nutrient 8, recycling run-off water until the hydrocarbon content falls to acceptable levels.

TECHNICAL DATA

Bacteria Type Euro Type 1 Bacterial Count 4.0 × 109 cfu/ml

AVAILABLE PACK SIZES

10 kg, 5 kg Tubs.

SAFE HANDLING AND STORAGE

Store in original containers and avoid extremes of temperature.
For guidance on handling and disposal see Material Safety Data Sheet.
Manufactured & supplied by Oil Technics Ltd.
England & Wales
The Croft
Abbots Walk
Stafford
England UK
ST16 3BN
Tel: +44(0) 1785 222970
Fax: +44(0) 1785 225519
stafford@oilbio.com
Scotland & Export
Linton Business Park
Gourdon
Aberdeenshire
Scotland UK
DD10 0NH
Tel: +44(0) 1561 361515
Fax: +44(0) 1561 361001
info@oilbio.com
WEB
www.oilbio.com
eshop
www.oilbio.com/shop
ISO 9001